Who doesn’t know that from the past? First the typical noise, then the unmistakable smell and finally the sign: Attention, freshly beaned. If you want to refresh your parquet these days, you can do so with much more user-friendly methods. Polishing parquet is by no means an expert task anymore. Nevertheless, there are a few things to keep in mind.
Why does polishing have to be done?
Who has a parquet floor in the own home, knows that this needs care, so that the valuable floor shines also in full gloss. The polishing of the parquet belongs to it. It primarily serves the optical effect, but also makes the flooring more resistant to moisture and dirt. This allows the owner to enjoy his parquet floor longer. Often, polishing is also necessary when renovation work has taken place nearby. But even small scratches can be easily removed by polishing and the owner does not have to sand the whole parquet immediately. Scratch removal works for both oiled and sealed parquet floors.
How often should the parquet be polished?
Polishing is not the same as cleaning. The latter should be done regularly so that dirt and marks do not settle on the floor. But the parquet should also be polished about twice a year. This measure is recommended especially before the cold season. Because then the floor is particularly stressed by dirty and wet shoes. Here a treatment with polish prevents. It is also necessary if scratches and small dents damage the floor. Then with some polishing this beauty flaw can be removed, without that immediately the entire parquet must be sanded down and sealed again. Most parquet types are either sealed with varnish or protected with oil. The type of flooring used is also crucial for polishing. If oil has been used, the pores of the wood are open. Here the wood breathes out over time – the shine decreases as oil and wax disappear from the pores. Therefore a polish is necessary more often. In the case of lacquer-finished floors, the wear layer that has been applied to the parquet decreases over time. Under certain circumstances, it may only be necessary to re-polish the running paths.
Polishing as in the old days and the polishing of today
A few years ago, floor polishing was a time-consuming and costly process. Who doesn’t know them anymore, the big polishing machines? They were used to heat floor polishing wax, which was evenly distributed onto the floor by the polishing machine. Many a machine was heavy and bulky. Today this technique is no longer up to date and would even be harmful on lacquer-finished parquet. Today’s floor polish is so-called “Polish”. These parquet polishes are equipped with synthetic resins and are therefore particularly tear-resistant and adhere well. They give the parquet resistance and longevity. The liquid form also allows easier processing compared to the once so bulky floor polish. The trade has different types in stock. The parquet owner can choose between finished mixtures and “Polish”, which still has to be mixed with water. In addition, the gloss also differs: depending on taste, the parquet can be glossy or matt after polishing.
The necessary utensils
If you want to polish your parquet floor, you will need polishing agents, but also parquet cleaners and, if necessary, wood putty and repair kits. On the tool list stand:
-Soft cotton cloths
-Wool or polishing cloths
if required polishing machine
The instructions: Step by step
Polishing begins with the first step: clearing the entire parquet floor. Furniture and carpets should first be removed from the room. Then the floor needs thorough cleaning. With the broom any dirt must be removed, which could rub on the parquet. Here also the vacuum cleaner can perform valuable services, if it has a soft brush and does not scratch so on the parquet. The floor should then be wiped with a damp cloth. After cleaning, repair kits are used. Are there any small scratches or cracks in the parquet? Then it should be repaired now. It is important that these areas dry before starting the polishing process.
The application of the polishing agent depends on the product. There are spraying agents that are applied to the surface ready, others must first be mixed with water and then applied with the mop. A cloth can also be used as a distributor. The actual polishing begins afterwards: either by hand with wool or polishing cloths or with the machine. This does not have to be bought at a high price, DIY stores also offer it for hire. What is important is that the movements on the parquet flooring. Read more about floor polishing singapore in our website.